• Standard Mode : Just measurement accuracy, HI, MID or LO needs to be set
• Automatic Mode : Ends measurement when moisture content changes at a rate less than the set rate
• Quick Mode : Begins heating samples at 200°C for 3 minutes, then is the same as Automatic Mode
• Timer Mode : Continues measurement for a set duration of time (1~60mins.: by 1min, 60~480mins.: by 5mins.)
• Manual Mode : STOP button should be pressed to end measurement (Max. heating time: 480mins.)

Selectable Heating Mode
Choose the heating mode from standard, quick, step and ramp heating modes for the most suitable measurement (ML has Standard and Quick heating modes only)

Clear and easy-to-see, large VFD display
Measurement, setting value, change in moisture content, action status, data number and other important information are clearly displayed

Easy handling of the unit
Ergonomically designed pan handle eliminates mishaps such as burns when moving a hot sample pan into or out of the unit from either side. Wing handle for easy opening and closing of the heater cover

Low maintenance cost assured
The halogen lamp is user replaceable without unit downtime with protective chamber for easy cleaning (Lamp life 5000 hours)

Progress window for heating check
Heating process can be checked through translucent window

Self Check function
Defect check function is available along with temperature control

Quick Reference Card
A convenient operating guide is installed at the bottom of the analyzer

Standard RS-232C
Bi-directional communication with a PC or connects directly to a printer

Conformity to GLP, GMP, GCP and ISO with date/time , ID, calibration data and check record outputs
Data output for daily record management